Skip to content
AER IntelAerTwin Help

TaskNeeds the Inspector or Admin role

Mark the location of an instrument

Place a mark on the structure where a monitoring instrument is installed — a piezometer, a crackmeter, a survey point — with its tag and type.

FindInstruments+ Place

An instrument mark records where an instrument is and what type it is. It carries no reading: instrument data stays in your monitoring system.

Anyone can open the Instruments panel and see the marks. Placing and removing marks needs the Inspector or Admin role.

  1. On the toolbar, click Instruments.

    The Instruments panel opens on the right and lists the instruments already marked.

  2. In the panel’s header, click + Place.

  3. Click the instrument’s location on the model.

    The Place instrument form opens.

  4. In Type, select the type of instrument.

    A line under the list says what that type measures.

  5. In Tag, enter the instrument’s tag — for example PZ-04. A tag is required.

  6. Optionally, enter a Note.

  7. Click Place.

    A symbol for the type appears on the model at the point, and the instrument is added to the list.

+ Place stays armed, so that you can mark a row of instruments one click each. To stop, click Cancel on the form or click + Place again.

Type Records the location of
Piezometer Pore water pressure in the foundation or the body of the dam
Water level Reservoir or tailwater elevation at a staff gauge or level sensor
Flow / weir Seepage or drainage discharge at a weir, drain or gallery outlet
Inclinometer Horizontal deflection measured down a borehole
Extensometer Change in length along a line, in rock or in concrete
Crackmeter Opening across a crack, a construction joint or a contact
Tiltmeter Rotation of a block, a gallery floor or a crest structure
Thermometer Temperature of the concrete, the foundation or the water
Seismic Ground or structure acceleration during an earthquake
Strain gauge Strain in concrete or in reinforcement
Survey point A surveyed target, geodetic monument or levelling benchmark
Other Any instrument the list does not name
  • Click → on an instrument to fly the view to it.
  • Click a type chip above the list to show only instruments of that type.
  • To remove an instrument, click × on its row. The notice offers Undo.
Parent topic: Record findingsUpdated 25 October 2026Feedback on this page
AerTwin HelpQuestions: support@aer-intel.com